null
  Loading... Please wait...
  • Work table
- Work table: 2700 x 1200 mm made of pietra serena, calibrated by the machine itself
- Axes strokes: 3000 x 1500 x 280 mm
Framework
- Monobloc frame and bridge in processed steel
protected by epoxy and ceramic paint
- Footprint and weight: 4000 x 2500 x 1950 mm, 2500kg
Linear guides
- Tempered and passivated steel
- Linear guides with 4 rows of recirculating ball bearings
Operating head
- Electro spindle 5 kW (7HP)
- Max. RPM 15.000
- ISO 30 STAINLESS CONEs
- Nickel-plated spindle shaft
- Cooled by liquid
- 3 balls pincer
- Automatic tool change
- Sensor to control coupling/uncoupling
Axis movements
- 4 brushless motors, 3,2 Nm torque
- ‘Y’ axis with gantry control
Vacuum system
- Preinstalled vacuum distributor to supply 12 suction cups
- 2 high efficient vacuum Venturi pumps require only simple maintenance
Control console
- 21.5” touch screen monitor, to keep under control any parameter
- LAN and WIFI connection for remote assistance
- Dedicated graphic card
- SSD hard disc
- Automatic back up to avoid data losses
- Proprietary software GCAM 3.0 – developed to process marble and granite
- CAD-CAM 2D, supported by pre-installed macros to program quickly any process in an utmost simple way
Laser
2 highly visible laser, to precisely position work pieces and suction cups
Power supply
- Electric: 400V 50/60 Hz three-phase (20A) or
220V 50/60 Hz three-phase (30A)
- Pneumatic: 10 bar pressure
- Compressed air: 300 l/min. A compressor of min. 4 kW
with 500 l tank is recommended
- Water supply connection required (min. capacity 20 liters/min, pressure min. 2 bar)
  • GMATIC 3000 - 3 axes CNC work centre
Solid, essential, equipped with accessories to simplify the execution of counter tops, shower
plates, inclined recessed kitchen tops, decorative elements, bas-relief and writing.
The large mono block frame permits to position and to process slabs of large dimensions like those
of new synthetic and ceramic materials. The work table, which is made of natural stone, rectified by
the machine itself, is easily accessible to load the work pieces.
The Gmatic 3000 uses brushless motors to move the axes on linear guides with recirculating ball
bearings blocks. The machine is available as a manual tool change version or with automatic tool
change.
  • ● Simple with macros
● Imports ISO and DXF files
● Intuitive CAD CAM
● Nesting
● Teleassistance
● Automatic backup
Console
● 21.5” touch screen to keep under
control any parameter
● LAN and WIFI connections for
remote assistance
● Dedicated graphic card
● SSD hard disk
  • Anthony Fenton Director of Fentech stone machinery at the Ghines booth in Verona fair Italy for the launch of the Gmatic3000
  • Profiling and polishing inside and outside
  • Drainer recess and grooving

Gmatic3000 CNC Center

sales@fentech.com.au

Product Description

GMATIC 3000 - 3 axes CNC work centre

SEE BELOW FOR VIDEO
Solid, essential, equipped with accessories to simplify the execution of counter tops, shower
plates, inclined recessed kitchen tops, decorative elements, bas-relief and writing.
The large mono block frame permits to position and to process slabs of large dimensions like those
of new synthetic and ceramic materials. The work table, which is made of natural stone, rectified by
the machine itself, is easily accessible to load the work pieces.
The Gmatic 3000 uses brushless motors to move the axes on linear guides with recirculating ball
bearings blocks. The machine is available as a manual tool change version or with automatic tool
change.

The control interface is a console provided with a comfortable large 21.5” touch screen, proprietary
GCAM software which has been especially developed for the stone industry. Intuitive and easily to
use, it allows to create executable programs nearly instantly by pre-installed macros.

TECHNICAL DATA
Work table
- Work table: 2700 x 1200 mm made of pietra serena, calibrated by the machine itself
- Axes strokes: 3000 x 1500 x 280 mm
Framework
- Monobloc frame and bridge in processed steel
protected by epoxy and ceramic paint
- Footprint and weight: 4000 x 2500 x 1950 mm, 2500kg
Linear guides
- Tempered and passivated steel
- Linear guides with 4 rows of recirculating ball bearings
Operating head
- Electro spindle 5 kW (7HP)
- Max. RPM 15.000
- ISO 30 STAINLESS CONEs
- Nickel-plated spindle shaft
- Cooled by liquid
- 3 balls pincer
- Automatic tool change
- Sensor to control coupling/uncoupling
Axis movements
- 4 brushless motors, 3,2 Nm torque
- ‘Y’ axis with gantry control
Vacuum system
- Preinstalled vacuum distributor to supply 12 suction cups
- 2 high efficient vacuum Venturi pumps require only simple maintenance
Control console
- 21.5” touch screen monitor, to keep under control any parameter
- LAN and WIFI connection for remote assistance
- Dedicated graphic card
- SSD hard disc
- Automatic back up to avoid data losses
- Proprietary software GCAM 3.0 – developed to process marble and granite
- CAD-CAM 2D, supported by pre-installed macros to program quickly any process in an utmost simple way
Laser
2 highly visible laser, to precisely position work pieces and suction cups
Power supply
- Electric: 400V 50/60 Hz three-phase (20A) or
220V 50/60 Hz three-phase (30A)
- Pneumatic: 10 bar pressure
- Compressed air: 300 l/min. A compressor of min. 4 kW
with 500 l tank is recommended
- Water supply connection required (min. capacity 20 liters/min, pressure min. 2 bar)

Product Videos

CNC router | Work center for stone countertop fabrication | Gmatic 3000 by Ghines 05:48

Hey you guys! Are you looking for a smart solution for your production of stone worktops? Take 5 minutes to watch the video on the newcomer in Ghines Redline, 100% made in Italy. GMATIC 3000 is a 3-axis CNC work center for stone fabrication designed to process large slabs and thick work pieces, nearly any type of contouring, milling, drilling, recessing, bas-reliefs or writing letters. Very accessible price and fast track learning curve of the native software, which is developed to make it easy to switch from “manual” to “digital” in an intuitive rapid way. more info: https://www.ghines.com/en/cnc-work-center-stone/ Some winning features: The large work strokes and at the same time the reduced footprint. An innovative chain transmission to moves the axes (long-lasting precision, zero maintenance and low noise), instead of rack/pinion system. Z axis driven by a steel wire-reinforced rubber belt (unmatched quality for inclined/recessed drain boards). Nesting function. Double motorization (Gantry) on the Y axis. Max safety and minimum noise level.

  • CNC router | W...
    Hey you guys! Are you looking for a smart solution for your pr...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Quantity:
SKU:
Gmatic3000